Real Time Positioning Vehicle Tracker 4G GPS Tracker with Vibration sensor Geo-fence Anti-theft
Product description
It integrates GPS/Beidou global positioning system technology and GSM wireless communication technology, built-in battery, and external 10~90V power supply. Realize the positioning and monitoring management of remote targets through SMS and global positioning service platform.
01-Receive GPS and BDS dual system single frequency satellite signals;
02-Support 4G, no signal area, after the 2G signal is restored, the positioning data will be automatically retransmitted;
03-Small size, easy to install or hide;
04-12V-90V wide voltage input.
Features:
1. Built-in GPS antenna, compact, elegant appearance.
2. Support GPS and LBS (Location based service) double tracking solutions.
3. Support SMS/GPRS/Internet Network data transmission
4. Support configure the settings remotel
5. Set multiple functions of security, tracking, monitoring surveillance, emergency alarms and management in its entirety.
Real Time Positioning Vehicle Tracker 4G GPS Tracker with Vibration sensor Geo-fence Anti-theft
Functions:
| Change Password | Vibration alarm |
| Authorization | Over speed alarm |
| Single Locating | ACC working alarm |
| Auto track continuously | Cut off the Oil and Power System |
| Absolute street address by SMS | Armed |
| Data logging | DISARmed |
| Set up monitor center number | ACC alarm Check the Vehicle State |
| Alarm Function | GPRS setting |
| Geo-fence | Less GPRS traffic |
| Multi-area management | Modes Switch between “SMS” and “GPRS” |
Real Time Positioning Vehicle Tracker 4G GPS Tracker with Vibration sensor Geo-fence Anti-theft
Specification:
| Content | Specification |
| DIM | 9.0×4.0×1.5cm |
| Weight | 50g |
| Network | GSM/GPRS |
| Band | 850/900/1800/1900Mhz |
| GPS sensitivity | -159dBm |
| GPS accuracy | 5m |
| GPS start time | Cold status 38s |
| Warm status 32s |
| Hot status 2s |
| Car power supply | 9 V -100 V |
| Back up battery | Chargeable 3.7V 350mAh Li-ion battery |
| Storage Temp | -40°C to +85°C |
| Operation Temp. | -20°C to +70°C |
| Humidity | 20%--80% non-condensing |
Real Time Positioning Vehicle Tracker 4G GPS Tracker with Vibration sensor Geo-fence Anti-theft
How to use and install the wireless gps tracker:
1. First of all, an IoT card or mobile phone card is necessary, because the location information needs to be obtained through the GPRS of the IoT card or mobile phone card. At the same time, the position signal of the locator needs to be supported by traffic during work.
2. Install the IoT card or mobile phone card according to the instructions in the product instructions, and do a series of opening tasks for the locator.
Third, you need to log in to the platform or mobile APP, because after the locator obtains the location, it needs to perform data conversion in the background through the software, and finally show the user the location of the target thing in the software in the form of a map.
4. In the next step, you need to consider where the wireless locator is installed. Try to choose a place where the concealment is good and the signal is not easy to be shielded, so as to ensure the realization of the locator function.
Contactor Details:
whatsapp: +86-13717161241
mobilephone: +86-13717161241
Wechat:+86-13717161241
website:www.gpstrackerlocator.com
Product Tags:
|
|
Real Time Positioning Vehicle Tracker 4G GPS Tracker with Vibration sensor Geo-fence Anti-theft Images
|
